Page 1 of 1

How to disable only 1 coin ID, for example coin ID =1

PostPosted: Mon Dec 17, 2007 8:10 pm
by Administrator
When you need to disable some coin ID (from 1 to 5) instead of clear all the setting in the AK5,
for example reset coin ID =1 only.
1. switch start-set switch to set
2. press the set button close to the LED. until you see the coin ID =01 . the LED will show 01
3. press and hold set button for 2-5 second when you hear a BI sound then you disable the accept of of the coin with coin ID =1.