driver for usb-2b9 cord

Questions about our products

driver for usb-2b9 cord

Postby pdm134 » Wed Jun 09, 2010 7:19 pm

The driver on the website does not recognise my USB-db9 wire it has 2303 on it old wire was HL-340

I found a driver Prolific USB -to-serial Comm port this installs it fine, as com3, but it still does not work.

I cannot find any HL-340 wires locally....help
pdm134
 
Posts: 8
Joined: Sat Aug 18, 2007 10:07 am

Re: driver for usb-2b9 cord

Postby Administrator » Mon Jun 21, 2010 12:08 am

If you use new USB cable, then you can use the following new USB driver
Attachments
new_usb_driver.zip
If you use new USB cable, then you can use the following new USB driver
(1.77 MiB) Downloaded 892 times
Administrator
 
Posts: 386
Joined: Tue Jan 16, 2007 1:38 am

Re: driver for usb-2b9 cord

Postby pdm134 » Thu Jul 01, 2010 5:16 pm

Administrator wrote:If you use new USB cable, then you can use the following new USB driver


That driver only for vista

I have downloaded & intalled "Prolific USB-to-Serial Comm Port". It is setup as COM4 and Weavefuture is COM4 too, but it does not work.

any ideas
pdm134
 
Posts: 8
Joined: Sat Aug 18, 2007 10:07 am

Re: driver for usb-2b9 cord

Postby pdm134 » Thu Jul 01, 2010 6:36 pm

pdm134 wrote:
Administrator wrote:If you use new USB cable, then you can use the following new USB driver


That driver only for vista

I have downloaded & intalled "Prolific USB-to-Serial Comm Port". It is setup as COM4 and Weavefuture is COM4 too, but it does not work.

any ideas



I have tried with a usb-db9 cord labeled "340" no work
then used a cable "2302" no good either with new drivers downloaded.

Then if I pull a "HL-340" from one of my other stations it works right away. Totally weird and super anoying. Where can I get another HL-340 cable?
pdm134
 
Posts: 8
Joined: Sat Aug 18, 2007 10:07 am

Re: driver for usb-2b9 cord

Postby Administrator » Sat Jul 03, 2010 9:14 am

There are few version of USB driver for AK5-USB, if you do not know which one, you can install all of them.
If you purchased the AK5-USB after June, 20, 2010, you need choose to install following 1 or all of these USB drivers.
vista, win7
http://www.weavefuture.com/download/USB ... Driver.zip
XP only
http://www.weavefuture.com/download/USB ... Driver.zip
generic
http://www.weavefuture.com/download/USB ... Driver.zip

You can order old "HL-340" cable by send email to sales@weavefuture.com
Administrator
 
Posts: 386
Joined: Tue Jan 16, 2007 1:38 am


Return to Do you need help?

Who is online

Users browsing this forum: Bing [Bot] and 3 guests

cron